CREE Lighting SEC-EDG-4M-WM-12-E-UL-BZ-350-40K

Description

CREE Lighting SEC-EDG-4M-WM-12-E-UL-BZ-350-40K

Slim, low profile design. Luminaire end cap is rugged die cast aluminum with integral,
weathertight LED driver compartments and high performance aluminum heat sinks
specifically designed for LED applications. Housing is rugged aluminum. Furnished
with low copper lightweight mounting box designed for installation over standard
and mud ring single gang J-Boxes. Secures to wall with four 3/16″ (5mm) screws (by
others). Conduit entry from top, bottom, sides and rear. Allows mounting for uplight
or downlight. Designed and approved for easy through-wiring. Includes leaf / debris
guard

SEC-EDG series includes a lightweight mounting box for installation and can be used as an uplight or downlight.  Please check the spec sheet for more details and customize the fixture with the options above to best fit your security lighting needs.

Construction & Materials:
• Slim, low-profile design
• Luminaire sides are rugged die-cast aluminum with integral, weathertight LED driver compartment and high-performance aluminum heat sinks specifically designed for LED applications
• Housing is rugged aluminum
• Furnished with low copper, lightweight mounting box designed for installation over standard and mud ring single gang J-Boxes
• Luminaire can also be directly mounted to a wall and surface wired
• Secures to a wall with four 3/16″ (5mm) screws (by others)
• Conduit entry from top, bottom, sides, and rear
• Allows mounting for uplight or downlight
• Designed and approved for easy through-wiring
• Includes leaf/debris guard
• Exclusive Colorfast DeltaGuard® finish features an E-Coat epoxy primer with an ultradurable powder topcoat, providing excellent resistance to corrosion, ultraviolet
degradation, and abrasion. Black, bronze, silver, and white are available
• Weight: See Dimensions and Weight Chart on page 1

Electrical System:
• Input Voltage: 120–277V, Class 1 drivers
• Power Factor: > 0.9 at full load
• Total Harmonic Distortion: < 20% at full load
• Integral weathertight J-Box with leads (wire nuts) for easy power hook up
• Integral 10kV surge suppression protection standard
• To address inrush current, a slow blow fuse or type C/D breaker should be used
• Maximum 10V Source Current: 120 LED: 0.15mA

Regulatory & Voluntary Qualifications:
• cULus Listed
• Suitable for wet locations
• Meets FCC Part 15 standards for conducted and radiated emissions
• Enclosure rated IP66 per IEC 60529 when ordered without P, PML or ML options
• 10kV surge suppression protection tested in accordance with IEEE/ANSI C62.41.2
• Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117
• DLC qualified. Exceptions apply when ordered with full backlight control. Please refer to www.designlights.org/QPL for the most current information
• Dark Sky Friendly, IDA Approved. Please refer to www.darksky.org/ for the most current information
• Meets Buy American requirements within ARRA